Floor Maintenance Tips: How to Maintain Your Stone Patio

If you want to make your traditional driveway look a little more aesthetically enhanced, you might want to consider building a paver stone patio. A lot of homeowners do away with this type of patio because it is time-consuming to build. But if you hire the right builders of patios Perth has today, you can be confident that they will do an excellent job at building something of quality. Once the patio is built, it should be easy to maintain and it will still last longer than other types of patios.

To get the maximum benefits out of the cost of hiring builders to make patio Perth has, you can follow these maintenance tips:

• Always invest in extra two or three pavers when building patios in Perth. That way, you will have something to replace the surface with if there are any chips or cracks to the original surface. This is an easy remedy to deal with those cracks, which could inevitably happen after wear and tear.

• When installing your paver patio with the help of expert contractors on patios Perth WA has, always use bumpers. This will keep your patio installation looking neat and clean. It will also make it possible for you to use a weed trimmer to maintain the weed around or near your patio corners.

• Apply polymeric sand over your paver patio. This layer of the polymeric mixture is made out of sand and concrete. This material will cause the patio surface to harden, which also prevents the weed from growing through it.

• If there are any grout that had formed on the tiles, you can use an acid wash to remove it. This will also remove any discoloration on the surface caused by moisture.

• After you do acid washing and fill in the chips and cracks in the tile, always use a grout sealer. This will make it more difficult for mold and mildew to form. Hence, it protects the integrity of the materials used on your stone paver patio.

• Make it a habit to sweep off the surface of your patio. This will help to get rid of dirt, debris and other types of waste that can add to the wear and tear of the materials.

• You can always use pressure washer when cleaning your patio. Make sure that you focus the pressure onto the surface of the stone and not towards the grout. Always start with less pressure and grow it incrementally until you find the right pressure level.

• Ideally, you need to apply stone patio sealant once every three years. The level of care will depend on the type of materials used for your patio. Therefore, you can ask recommendation from contractors you hired to build patios Perth currently has about the ideal maintenance for the patio.

If you want to get more tips on how to maintain your paver stone patio, or you are looking for builders of patios Perth has, you can visit http://platinumoutdoors.com.au/. You will find everything you need to build your home’s dream patio.

Leave a Comment

(0 Comments)

Your email address will not be published. Required fields are marked *